Type: Driver
File Name:
File Size: 33.5 MB
70 (4.86)
Downloads: 39
Supported systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista
Price: Free* (*Free Registration Required)

Download Now

System not supported. See the section WMI support required on page 4 for additional information. It is secured with one captive screw. Page 53 Push the drive out of the computer 2 to disconnect the drive from the connector, and then remove the drive from hp pro 3420 computer.

UserBenchmark: HP Pro AiO PC Compatible Components

Figure Removing the optical drive If you need to remove the bracket from the optical drive, remove the two screws 1 that secure the bracket to the drive, and then remove the bracket hp pro 3420 the drive 2. Page 54 If you need to remove the bezel from the optical drive, pull hp pro 3420 right side of the bezel away from the front of the drive, and then rotate it away to remove it. Make note of the tabs that hold the bezel in place. The drive is secured with one captive screw and is housed in a removable cage.

vmware xorgcompatible upgrades
msi gx620xYour Personal Data
intel h55hcBuy It Now
mfc 8460n scannerFilter by:

Page 56 Hp pro 3420 the handle on top of the hard drive cage 2slide the cage toward the edge of the computer 3then lift the cage out of the computer. Figure Removing the hard drive cage assembly Remove the 4 mounting screws 1 that secure the hard drive to the hard drive cage. Do not remove hp pro 3420 rubber grommets behind each screw.

HP - Compaq HP Pro 3420 All-in-One

It is secured with two screws. Figure System board cover location To remove the system board cover: Hp pro 3420 the computer for disassembly see Preparing to Disassemble the Computer on page Page 58 Lift the connector side of the cover up to a degree angle 2and then lift the cover off the computer 3.

Figure Removing the system board cover To hp pro 3420 the system board cover, reverse the removal procedures. When replacing the cover, note the tabs that fit into slots in the computer on the side opposite the screws.


The computer has two hp pro 3420 slots. Page 62 Remove screw 2 that secures the module to the computer. If you need to replace the WLAN antennas, remove them from the routing path built into the computer.

Page 63 Remove the screw that secures each antenna only one shown hp pro 3420 the following image to the computer, and then remove the antennas from the computer. WLAN Module Page Fan Description Spare part number The fan is located in the middle of the computer.

It is secured with three screws. Figure Fan location To remove the fan: Hp pro 3420 the computer for disassembly see Preparing to Disassemble the Computer on page Intel Pentium G Processor 2.

Intel Celeron G Processor 2. Electrical specifications Specification. Physical specifications Specification.


All components have been fully tested and functional. Case may show some signs of use such as light minor scratches and scuffs.HP Pro All-in-One Business PC is completely hp pro 3420 and powerful enough to handle all computing tasks. A full-function, great looking PC with a heritage of.

  • HP Pro All-in-One PC - Software and Driver Downloads HP® Customer Support
  • HP Pro All-in-One PC Product Specifications HP® Customer Support
  • HP Pro All-in-One 3420 - Core i3 2130 3.4 GHz - Monitor : LED 20" Series Specs
  • Product description
  • HP Pro 3420 All-in-One PC Product Specifications

Download the latest drivers, firmware, and software for your HP Pro All-in- One is HP's official website that will help automatically detect and.

Related Drivers